Coating Thickness Gauge CM-8826 FN

Product Description

Coating Thickness Gauge CM-1210A , Alat Ukur Ketebalan Cat CM-1210A

Coating Thickness Gauge CTG-20...

Wet film Thickness gauge CM-80...

Coating Thickness Gauge CM-8826FN
Coating thickness Gauge is widely used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storage tanks,etc.In industries of petroleum,shipbuilding,power station,and machine manufacturing.

Operating principle:
CM-8826F: F type(magnetic induction), measure the thickness of non-magnetic coating layers such as (aluminum,chrome,copper,ename1,rubber,paint) on magnetic substrate (steel, iron, alloy and magnetic steel)
CM-8826N: NF type (eddy current), measure the thickness of non-conductive coating layers (ename1, rubber, paint, vanish, plastic anodic oxide layer) covered on non-ferrous substrate (aluminum, brass, zinc, tin and non-magnetic stainless steel)
CM-8826FN: F type & NF type

Specifications:
With separate probes
Measuring range: 0-1250um/0-50mil
Resolution: 0.1/1
Accuracy: +/-1-3%n or +/-2.5um
Min. measuring area: 6mm
Min. sample thickness: 0.3mm
Battery indicator: low battery indicator
Metric/ imperial: convertible
Power supply: 4×1.5V AAA(UM-4)battery
Auto power off
Operating conditions: 0-+45C(32F-104F), =90%RH
Dimensions: 126x65x27mm (5×2.6×1.07 inch)
Weight: 81g / 0.18(not including battery)
Optional accessories: other range 0-200um to 15000um

Email to a friend

Deskripsi

Coating Thickness Gauge CM-8826 FN , Alat ukur ketebalan cat CM-8826 FN

The F probes measure the thickness of non-magnetic materials (e.g. paint,plastic,porcelain enamel,copper,zinc, aluminium, chrome etc.) on magnetic materials (e.g. iron, nickle etc.) . often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer,copper tile,aluminium tile,some alloy tile, paper etc.
Applications:
The F probes measure the thickness of non-magnetic materials (e.g. paint,plastic,porcelain enamel,copper,zinc, aluminium, chrome etc.) on magnetic materials (e.g. iron, nickle etc.) . often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer,copper tile,aluminium tile,some alloy tile, paper etc.The N probes measure the thickness of non-magnetic coatings on non-magnetic metals. It is used on anodizing, varnish, paint, enamel,plastic coatings,powder, etc. applied to aluminum,brass,non-magnetic stainless steel, etc.

Coating Thickness Gauge Atau Alat Ukur Ketebalan Cat Ini adalah alat ukur ketebalan lapisan cat pada besi, lapisan galvanis, lapizan anodizing dan pengukuran lapisan coating lainnya pada logam ferrous dan non ferrous, Coating Thickness Gauge ini mampu melakukan pengukuran dengan cepat dan tepat dengan pengukuran ketebalan yang presisi.
Coating Thickness Gauge Memiliki Banyak Varian Type dan Jesins
Cara Pengukuran alat ini sangat gampang cukup tempelkan Coating Thickness gauge pada benda yang di cat atau material yang lain kemudian akan muncul angka pada display Berapa micron ketebalannya.

Berikut di Bawah ini Produk Coating Thickness yang Tersedia di BONA INDO TEKNIK
Coating Thickness Gauge CM-8826FN Atau Alat Ukur Ketebalan Cat CM-8826 FN
Coating Thickness Gauge CM-1210A , CM-1210B Atau Alat Ukur Ketebalan Cat CM-1210A , CM-1210B
Coating Thickness Gauge CTG-2000 Atau Alat Ukur Ketebalan Cat CTG-2000
Coating Thickness Gauge CTG-1250 Atau Alat Ukur Ketebalan Cat CTG-1250
Coating Thckness Gauge CTG-1300 Atau Alat Ukur Ketebalan Cat CTG-1300
coating thickness gauge elcometer Atau Alat Ukur Ketebalan Cat Elcometer

Reviews

There are no reviews yet.

Be the first to review “Coating Thickness Gauge CM-8826 FN” Batalkan balasan

Returns and Exchanges

There are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.

You have 14 calendar days to return an item from the date you received it.
Only items that have been purchased directly from Us.
Please ensure that the item you are returning is repackaged with all elements.

Ship your item back to Us

Firstly Print and return this Returns Form to:

30 South Park Avenue, San Francisco, CA 94108, USA
Please remember to ensure that the item you are returning is repackaged with all elements.

For more information, view our full Returns and Exchanges information.

Related Products

Gloss Meter GM-268

GLOSS METER GM-268 Triple Angle Glossmeter 20°/60°/85° Cara Order Produk…!!! Hubungi CS Kami Melalui Kontak WA atau email di sebelah Kanan

Mitech MT150 Ultrasonic Thickness Gauge

Coating Thickness Gauge CTG-1300

Coating Thickness Gauge CTG-1300 Measuring range : 0 to 1300 um (0 to 51.18mils) (Probe Ferros and Non Ferros ) Cara Order Produk Atau Info Harga …!!! Hubungi CS Kami Melalui Kontak Telp/ Hp/ Wa/ email

Merlin HM8-WS13 Furniture

Merlin HM8-WS13 Furniture The Merlin HM8-WS13 Moisture Meter measures 13-20mm in depth with simple contact on a wood surface. It accurately measures moisture of 4-99% while the cursor allows presetting the moisture in wood density to obtain a accurate result. The Merlin HM8-WS13 is extremely easy to use and with instantaneous moisture measurement it is a great tool for anyone who wants a fast and accurate measurement. Specification : Dimension : 120 x 60 x 25 mm Weigh : 160 g Scanning Depth : 13 - 20 mm Sensor Dimension : 78 x 45 mm Measuring Range : 4% - 99% Timber Group : 1 – 6 Density Range : 370 - 670 kg/ m³ Power Supply : 9V Battery or NiCd Akku

Mitech MT180 Ultrasonic Thickness Gauge

Mitech MT180 Ultrasonic Thickness Gauge Range : 0.65-600mm ( Pulse Echo ) in steel , 3-30 ( Echo-Echo ) Sound Velocity Range : 1000 - 9999 m/s Resolution : 0.1mm/0.01mm Cara Order Produk Atau Info Harga …!!! Hubungi CS Kami Melalui Kontak Telp/ Hp/ Wa/ email

BES Bollmann HDI 3.10

BES Bollmann H-DI 3.10 Moisture meter H-DI 3.10 - the professional series timber / Building moisture measuring device In addition to the features possessed by the H-DI 3.3 the H-DI 3.10 has temperature correction, an extended measuring range the capacity to measure building moisture content and FMPA approval. And because of their high-precision measuring capacity, they are the perfect tool for all professionals woh want rapid, precise measurement on site. Specifications : Measuring Range : 4 - 100 % Display Resolution : 0,10% Application : Timber , derived timer products , building materials Measuring principle : Electrical resistance Ambient temperature : 0 - 40°C Setting switch : 2 Battery : 9V Compound battery/IEC 6F 22 Dimensions : 140 x 80 x 40 mm Weight : 220 g

Coating Thickness Gauge CTG-2000

Coating Thickness Gauge CTG-2000 Specification : Operating Principle:Magnetic Induction / Eddy Current (F / NF) Measuring Range:0~2000 um / 0~80 mil Resolution:0.1 um / 1 um Min. Radius Workpiece:F Type: convex 1.5 mm / concave 25 mm NF Type: convex 3 mm / concave 50 mm Min. Measuring Area: 6 mm Min. Sample Thickness: 0.3 mm Accuracy: ±1~3%n or ± 2.5 um Auto Power Off:Yes Metric / Imperial:Convertible Battery Indicator:Low Battery Indicator Operating Conditions: Temp. 0~40 °C, Humidity: 10~90 %RH Power Supply: 4 x 1.5 V AAA (UM-4) Battery (not included) Dimensions: 140 x 72 x 34 mm ( 5.5 x 2.8 x 1.3 inch ) Standard Accessories: Main Unit Probe (F Type & NF Type) Calibration Base Set (F Type / NF Type) CTG-BS Calibration Foils CTG-CF (1 set, 4 pieces) Carrying Case Operation Manual

Coating Thickness Gauge AC-110AS

Coating Thickness Gauge AC-110AS Measuring Range : 0~1250 um , 0~50mil (other range may be specified) Resolution : 0.1 um (0~99.9um)/1 um (over 100um) Accuracy : 1~3%n or 2.5 um or 0.1mil (Whichever is the greater) Minimum Measurement Area : 6 mm Minimal Surface : F Type convex1.5 mm / concave 25 mm Minimal Surface : NF Type convex 3 mm / concave 50mm Operating Condition Temp : 0~50°C / Humidity : <95% Size : 120x63x25 mm Power Supply : 2x1.5vAAA Um-4 Battery Weight : 90 g (Not including batteries) Standard Accessories : Main Unit Wrist Ring Calibration Foils Substrate ( Iron ) Substrate ( Aluminium ) Carrying Case Operation Manual

Viscometer Rion VT-06

Viscometer Rion VT-06 Specifications Measurement range : (based on combination with the cup specifi ed below “Sample fl uid capacity”) No. 3 rotor: 0.3 to 13 dPa•s (resolution: 0.1) No. 1 rotor: 3 to 150 dPa•s (resolution: 1) No. 2 rotor: 100 to 4000 dPa•s (resolution: 10) Sample fl uid capacity No. 1 and No. 2 rotor : Approx. 350 mL (with JIS 300 mL beaker) No. 3 rotor : Approx. 150 mL (with No. 3 cup) Clearance between rotor end and cup bottom: about 15 mm Measurement accuracy : ±10% of indicated value Reproduciblility : ±5% Rotor Speed : 62.5 rpm Power Supplay : IEC LR6 ( Size AA ) AC adaptor : VA-05J Dimensions : 175(H) x 77(W) x 40(D)mm( without protruding parts ) Weight : 260 g ( without batteries ) Supplied accessories No. 1 rotor (dia. 24 × 53 × 166 mm) SUS304 1 No. 2 rotor (dia. 15 × 1 × 113 mm) SUS304 1 No. 3 rotor (dia. 45 × 47 × 160 mm) SUS304 1 No. 3 Cup (dia. 52.6 × 75 mm) SUS304 1 Rotor extension (in a tube) (900 mm; 300 mm × 3) SUS304 1 IEC LR6 (size AA) battery 4 Instruction manual 1 Viscosity measurement guide 1 Inspection certifi cate 1

Wet film Thickness gauge CM-8000

Wet Film Comb CM-8000 Applications: Used for checking the thickness coating of wet paint, enamel lacquer,adhensive , architectural coating, color coating, varnish, chemical industry,or other coating that has been applied to a smooth surface. Measuring Range: 5-118mil Step Graduation : 25um Measuring Procedure : 1. Select appropriate comb according to approximate known thickness. 2. Hold comb perpendicular to surface coating to be measured. 3. Press into coating until the comb stands square on substrate. 4. Wet film thickness is between the highest step which is coated and the next (higher) step which remains uncoated.

Coating Thickness Gauge CM-1210A

Coating Thickness Gauge CM-1210A Operating Principle:Magnetic Induction / Eddy Current (F / NF) Measuring Range:0~2000 um / 0~80 mil Resolution:0.1 um / 1 um Min. Radius Workpiece:F Type: convex 1.5 mm / concave 25 mm NF Type: convex 3 mm / concave 50 mm Min. Measuring Area: 6 mm Min. Sample Thickness: 0.3 mm Accuracy: ±1~3%n or ± 2.5 um Auto Power Off:Yes Metric / Imperial:Convertible Battery Indicator:Low Battery Indicator Operating Conditions: Temp. 0~40 °C, Humidity: 10~90 %RH Power Supply: 4 x 1.5 V AAA (UM-4) Battery (not included) Dimensions: 140 x 72 x 34 mm ( 5.5 x 2.8 x 1.3 inch ) Standard Accessories: Main Unit Probe (F Type & NF Type) Calibration Base Set (F Type / NF Type) CTG-BS Calibration Foils CTG-CF (1 set, 4 pieces) Carrying Case Operation Manual

Merlin HM8-WS25 Sawmill

Merlin HM8-WS25 Sawmill The Merlin HM8-WS25 Moisture Meter is the perfect meter for sawmills. The high density pinless handheld moisture meter is for the measurement of moisture in thick wood. Scan large boards effortlessly with the extra wide 3.15” x 2.8” sensor. The Merlin HM8-WS25 has an easy to read digital display. The HM8-WS25 penetrates 60% DEEPER into the wood than others and measures at 25-40mm with a 4-99% Moisture range. Specification : Dimension : 120 x 60 x 25 mm Weigh : 160 g Scanning Depth : 25 - 40 mm Sensor Dimension : 80 x 72 mm Measuring Range : 4% - 99% Timber Group : 1 – 6 Density Range : 370 - 670 kg/ m³ Power Supply : 9V Battery or NiCd Akku

Anest Iwata NK2 Viscosity Cup

Anest Iwata NK2 Viscosity Cup This viscosimeter is a compact tool to judge liquid viscosity in a simple way and is not a measuring instrument. Specifications Material Stainless Steel Model : NK-2 Cup Viscosity Range : 10-60 sec

Coating Thickness Gauge CM-8825 FN

Coating Thickness Gauge CM-8825 FN Coating thickness meter is widely used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storage tanks,etc.In industries of petroleum,shipbuilding,power station,and machine manufacturing. Operating principle: CM-8825F: F type(magnetic induction), measure the thickness of non-magnetic coating layers such as (aluminum,chrome,copper,ename1,rubber,paint) on magnetic substrate (steel, iron, alloy and magnetic steel) CM-8825N: NF type (eddy current), measure the thickness of non-conductive coating layers (ename1, rubber, paint, vanish, plastic anodic oxide layer) covered on non-ferrous substrate (aluminum, brass, zinc, tin and non-magnetic stainless steel) CM-8825FN: F type & NF type Specification: Operating Principle:Magnetic Induction / Eddy Current (F / NF) Measuring Range: 0~1250 μm / 0~50 mil Resolution:0.1 μm / 1 m Min. Radius Workpiece: F Type: convex 1.5 mm / concave 25 mm; NF Type: convex 3 mm / concave 50 mm Min. Measuring Area:6 mm Min. Sample Thickness:0.3 mm Accuracy:± 1~3%n or ± 2.5 μm Auto Power Off Metric / Imperial:Convertible Battery Indicator: Low Battery Indicator Operating Conditions:Temp. 0~50 °C, Humidity: <80 %RH Power Supply:4 x 1.5 V AAA (UM-4) Battery(no included) Dimensions:126 x 65 x 27 mm Weight:81 g (Not Including Batteries) Standard Accesories : Main Unit Probe F Probe FN Calibration Base F Calibration Base FN Calibration Foils 1 set , 4 Pcs Carrying Case Opltional Manual

Coating Thickness Gauge CTG-1250

Coating Thickness Gauge CTG -1250 Two types of probe equipped, Fe & No Fe Measuring Coatings: Non-magnetic coatings (e.g. paint, zinc) on steel; insulating coatings (e.g. paint, anodizing coatings) on non-ferrous metals Wide measuring range (0 ~ 1250 μm / 0 ~ 50 mil) and high precision Two measuring modes: CONTINUE & SINGLE Two working modes: DIRECT & GROUP (4 groups) Max 400 data memory One point calibrating and two points calibrating independently for each working mode Statistic display: AVG, MAX, MIN, S.DEV LCD with blue backlight V-groove in the sleeve of the probe facilitates reliable measurement on small cylindrical parts Probe made of hard and durable material High and low alarm Low battery and error indication Auto Power off (can be disabled) Substrates & calibration foils included USB cable and software CD included (compatible with Windows 98/2000/XP/Vista/7)