Coating Thickness Gauge Atau Alat Ukur Ketebalan Cat Ini adalah alat ukur ketebalan lapisan cat pada besi, lapisan galvanis, lapizan anodizing dan pengukuran lapisan coating lainnya pada logam ferrous dan non ferrous, Coating Thickness Gauge ini mampu melakukan pengukuran dengan cepat dan tepat dengan pengukuran ketebalan yang presisi.
Coating Thickness Gauge Memiliki Banyak Varian Type dan Jesins
Cara Pengukuran alat ini sangat gampang cukup tempelkan Coating Thickness gauge pada benda yang di cat atau material yang lain kemudian akan muncul angka pada display Berapa micron ketebalannya.
Berikut di Bawah ini Produk Coating Thickness yang Tersedia di BONA INDO TEKNIK
Coating Thikness Gauge CM-8826FN Atau Alat Ukur Ketebalan Cat CM-8826 FN
Coating Thikness Gauge CM-1210A , CM-1210B Atau Alat Ukur Ketebalan Cat CM-1210A , CM-1210B
Coating Thikness Gauge CTG-2000 Atau Alat Ukur Ketebalan Cat CTG-2000
Coating Thikness Gauge CTG-1250 Atau Alat Ukur Ketebalan Cat CTG-1250
Coating Thikness Gauge CTG-1300 Atau Alat Ukur Ketebalan Cat CTG-1300
coating thickness gauge elcometer Atau Alat Ukur Ketebalan Cat Elcometer
Menampilkan semua 10 hasil
Coating Thickness Gauge AC-110AS
Measuring Range : 0~1250 um , 0~50mil (other range may be specified)
Resolution : 0.1 um (0~99.9um)/1 um (over 100um)
Accuracy : 1~3%n or 2.5 um or 0.1mil (Whichever is the greater)
Minimum Measurement Area : 6 mm
Minimal Surface : F Type convex1.5 mm / concave 25 mm
Minimal Surface : NF Type convex 3 mm / concave 50mm
Operating Condition Temp : 0~50°C /
Humidity : <95%
Size : 120x63x25 mm
Power Supply : 2x1.5vAAA Um-4 Battery
Weight : 90 g (Not including batteries)
Standard Accessories :
Main Unit
Wrist Ring
Calibration Foils
Substrate ( Iron )
Substrate ( Aluminium )
Carrying Case
Operation Manual
Coating Thickness Gauge CM-1210A
Operating Principle:Magnetic Induction / Eddy Current (F / NF)
Measuring Range:0~2000 um / 0~80 mil
Resolution:0.1 um / 1 um
Min. Radius Workpiece:F Type: convex 1.5 mm / concave 25 mm NF Type: convex 3 mm / concave 50 mm
Min. Measuring Area: 6 mm
Min. Sample Thickness: 0.3 mm
Accuracy: ±1~3%n or ± 2.5 um
Auto Power Off:Yes
Metric / Imperial:Convertible
Battery Indicator:Low Battery Indicator
Operating Conditions: Temp. 0~40 °C, Humidity: 10~90 %RH
Power Supply: 4 x 1.5 V AAA (UM-4) Battery (not included)
Dimensions: 140 x 72 x 34 mm ( 5.5 x 2.8 x 1.3 inch )
Standard Accessories:
Main Unit
Probe (F Type & NF Type)
Calibration Base Set (F Type / NF Type) CTG-BS
Calibration Foils CTG-CF (1 set, 4 pieces)
Carrying Case
Operation Manual
Coating Thickness Gauge CM-8825 FN
Coating thickness meter is widely used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storage tanks,etc.In industries of petroleum,shipbuilding,power station,and machine manufacturing.
Operating principle:
CM-8825F: F type(magnetic induction), measure the thickness of non-magnetic coating layers such as (aluminum,chrome,copper,ename1,rubber,paint) on magnetic substrate (steel, iron, alloy and magnetic steel)
CM-8825N: NF type (eddy current), measure the thickness of non-conductive coating layers (ename1, rubber, paint, vanish, plastic anodic oxide layer) covered on non-ferrous substrate (aluminum, brass, zinc, tin and non-magnetic stainless steel)
CM-8825FN: F type & NF type
Specification:
Operating Principle:Magnetic Induction / Eddy Current (F / NF)
Measuring Range: 0~1250 μm / 0~50 mil
Resolution:0.1 μm / 1 m
Min. Radius Workpiece: F Type: convex 1.5 mm / concave 25 mm; NF Type: convex 3 mm / concave 50 mm
Min. Measuring Area:6 mm
Min. Sample Thickness:0.3 mm
Accuracy:± 1~3%n or ± 2.5 μm
Auto Power Off
Metric / Imperial:Convertible
Battery Indicator: Low Battery Indicator
Operating Conditions:Temp. 0~50 °C, Humidity: <80 %RH
Power Supply:4 x 1.5 V AAA (UM-4) Battery(no included)
Dimensions:126 x 65 x 27 mm
Weight:81 g (Not Including Batteries)
Standard Accesories :
Main Unit
Probe F
Probe FN
Calibration Base F
Calibration Base FN
Calibration Foils 1 set , 4 Pcs
Carrying Case
Opltional Manual
Coating Thickness Gauge CM-8826FN
Coating thickness Gauge is widely used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storage tanks,etc.In industries of petroleum,shipbuilding,power station,and machine manufacturing.
Operating principle:
CM-8826F: F type(magnetic induction), measure the thickness of non-magnetic coating layers such as (aluminum,chrome,copper,ename1,rubber,paint) on magnetic substrate (steel, iron, alloy and magnetic steel)
CM-8826N: NF type (eddy current), measure the thickness of non-conductive coating layers (ename1, rubber, paint, vanish, plastic anodic oxide layer) covered on non-ferrous substrate (aluminum, brass, zinc, tin and non-magnetic stainless steel)
CM-8826FN: F type & NF type
Specifications:
With separate probes
Measuring range: 0-1250um/0-50mil
Resolution: 0.1/1
Accuracy: +/-1-3%n or +/-2.5um
Min. measuring area: 6mm
Min. sample thickness: 0.3mm
Battery indicator: low battery indicator
Metric/ imperial: convertible
Power supply: 4x1.5V AAA(UM-4)battery
Auto power off
Operating conditions: 0-+45C(32F-104F), =90%RH
Dimensions: 126x65x27mm (5x2.6x1.07 inch)
Weight: 81g / 0.18(not including battery)
Optional accessories: other range 0-200um to 15000um
Coating Thickness Gauge CTG -1250
Two types of probe equipped, Fe & No Fe
Measuring Coatings: Non-magnetic coatings (e.g. paint, zinc) on steel; insulating coatings (e.g. paint, anodizing coatings) on non-ferrous metals
Wide measuring range (0 ~ 1250 μm / 0 ~ 50 mil) and high precision
Two measuring modes: CONTINUE & SINGLE
Two working modes: DIRECT & GROUP (4 groups)
Max 400 data memory
One point calibrating and two points calibrating independently for each working mode
Statistic display: AVG, MAX, MIN, S.DEV
LCD with blue backlight
V-groove in the sleeve of the probe facilitates reliable measurement on small cylindrical parts
Probe made of hard and durable material
High and low alarm
Low battery and error indication
Auto Power off (can be disabled)
Substrates & calibration foils included
USB cable and software CD included (compatible with Windows 98/2000/XP/Vista/7)
Coating Thickness Gauge CTG-1300
Measuring range : 0 to 1300 um (0 to 51.18mils) (Probe Ferros and Non Ferros )
Cara Order Produk Atau Info Harga …!!!
Hubungi CS Kami Melalui Kontak Telp/ Hp/ Wa/ email
Coating Thickness Gauge CTG-2000
Specification :
Operating Principle:Magnetic Induction / Eddy Current (F / NF)
Measuring Range:0~2000 um / 0~80 mil
Resolution:0.1 um / 1 um
Min. Radius Workpiece:F Type: convex 1.5 mm / concave 25 mm NF Type: convex 3 mm / concave 50 mm
Min. Measuring Area: 6 mm
Min. Sample Thickness: 0.3 mm
Accuracy: ±1~3%n or ± 2.5 um
Auto Power Off:Yes
Metric / Imperial:Convertible
Battery Indicator:Low Battery Indicator
Operating Conditions: Temp. 0~40 °C, Humidity: 10~90 %RH
Power Supply: 4 x 1.5 V AAA (UM-4) Battery (not included)
Dimensions: 140 x 72 x 34 mm ( 5.5 x 2.8 x 1.3 inch )
Standard Accessories:
Main Unit
Probe (F Type & NF Type)
Calibration Base Set (F Type / NF Type) CTG-BS
Calibration Foils CTG-CF (1 set, 4 pieces)
Carrying Case
Operation Manual
Coating Thickness Gauge
Measuring principle: Magnetic induction (F-probe) and eddy current (N-probe)
Measuring range: 0 to 2000um
Accuracy: ± (3% of readings+1um)
Cara Order Produk Atau Info Harga …!!!
Hubungi CS Kami Melalui Kontak Telp/ Hp/ Wa/ email
Wet Film Comb CM-8000
Applications:
Used for checking the thickness coating of wet paint, enamel lacquer,adhensive , architectural coating, color coating, varnish, chemical industry,or other coating that has been applied to a smooth surface.
Measuring Range: 5-118mil
Step Graduation : 25um
Measuring Procedure :
1. Select appropriate comb according to approximate known thickness.
2. Hold comb perpendicular to surface coating to be measured.
3. Press into coating until the comb stands square on substrate.
4. Wet film thickness is between the highest step which is coated and the next (higher) step which remains uncoated.